Skip to main content

Lift Chair Repair in Tampa, Sarasota, Naples and South Florida

4.79★ · $59 service call · same day

Same-day slots most days, 7 AM–9 PM. 19 factory-trained technicians, 4.79★ across 1,300 customer reviews — the $59 service call is waived when you proceed with the repair. $59 covers the visit and diagnosis and is credited to the repair if you go ahead. If you don't, it's the only charge.

Request service
Berne technicians

Rather not call? Leave your number

Name, phone and what broke. Dispatch calls you back, usually within 10 minutes between 7 AM and 9 PM.

Text us a photoSend a photo of the problem and the model tag to (786) 435-0511, or call (754) 345-4515.

By submitting you agree to be contacted by phone or SMS about your service request. No marketing messages.

Lift chair repair at home, from Tampa, Sarasota and Naples to Boca Raton and Miami. Chairs stuck in the up position, chairs that will not lift or lower, dead remotes, worn lift motors and failed power supplies on Pride, Golden Technologies, La-Z-Boy, Catnapper and other lift recliners. The $59 service call is credited to the repair you approve.

For a lot of owners the lift chair is how they get up in the morning, so a dead chair is a bigger problem than a broken recliner. Mechanically, though, a lift chair is a power recliner with a stronger motor. It runs on the same short chain of parts: the wall outlet, a power supply, the cables under the seat, a hand control and one or two linear actuators, the motors with a metal tube that push the seat up and forward. Our technicians test that chain with a meter where the chair stands, starting with the cheap parts. Often the fault turns out to be the power supply, a cable or the remote. The lift motor is tested last and replaced only when the test says so.

If the lift chair is stuck right now

  1. Plug a lamp into the same outlet. If the lamp stays dark, check the switch on the power strip or the breaker.
  2. Find the power supply, the small box on the cord between the wall and the chair. Many have a green light. No light means no power is reaching the chair.
  3. Unplug the chair from the wall, then check the plugs under the seat. Cables come apart when the chair is moved or cleaned around, and pets chew them.
  4. If the chair has a battery backup (a small box, often holding two 9-volt batteries), put in fresh batteries and press down on the remote with the chair unplugged.
  5. Do not push the seat down by hand or sit on it to force it. That bends the lift frame. Leave the chair where it is, unplugged, and call us with the brand from the tag.

Lift chair problems we fix

Stuck in the up position or will not go down
Usually a power supply that died with the chair raised, a cable that came loose under the seat, or a dead button on the remote. A worn lift motor can also stall halfway under load. We test power and the remote first, then the motor.
Will not lift, or rises a few inches and stops
A motor that hums without moving has usually stripped its gear or drive nut. A chair that starts up and quits can be a weak power supply, a motor shutting off on its thermal cutout, or a mechanism that binds. We disconnect the motor and move the mechanism by hand before deciding which.
The chair moves by itself
A back that keeps rising and pushes you out, or a chair that lifts with nobody touching the remote, points to a stuck button or a short inside the hand control, and sometimes to the control box. Unplug it and keep everyone out of it until it is checked.
Remote dead or working only sometimes
Bent pins in the plug, a cable pinched by the mechanism, or a worn board inside the remote. Remotes with heat, massage or a USB port are matched to the chair model and the plug, so a photo of the remote and its plug helps us bring the right one.
The back works but the footrest does not
On a dual-motor chair one motor runs the back and the other runs the footrest and lift. When only one motion works, the cause is one of those motors, its cable or one channel of the control box. We test each motor on its own.
Battery backup does not lower the chair
Dead batteries first, then a cracked battery box or a loose lead between the box and the motor. We test the backup with the chair unplugged, the way it has to work in an outage.
Cable chewed or crushed
Dogs find the cables under a lift chair, and so does the mechanism when a cable hangs loose. We replace the damaged cable, check the power supply it fed, and route the new one away from the moving arms.
Grinding, clunking, or the chair shakes as it lifts
Loose bolts on the lift mechanism or worn bushings, sometimes a bent arm after the chair was forced down. Tightening and new bushings cure most of it. A cracked weld or a bent lift arm needs the part replaced.

One motor or two

A single-motor lift chair, sold as two-position or three-position, moves the back and footrest together with one actuator and runs on a two-button remote. A dual-motor chair, usually sold as infinite-position, moves the back and the footrest separately, so it has two actuators, a bigger remote and often a control box under the seat. Some newer chairs add a third motor for a power headrest or lumbar support.

Every actuator carries a label with the maker (Okin, Limoss, Dewert, Kaidi or Timotion), a part number and the stroke length. We order replacement motors by that label, because two motors that look the same can differ in stroke, mounting holes and plug. If you can see the label, text a photo of it to (786) 435-0511 before the visit.

Lift chairs we work on

What lift chair repair costs

The service call is $59 and is credited to the repair if you go ahead. You get the price in writing after the diagnosis, before anything is ordered. A remote, a cable or a power supply is the cheaper end of the scale. A new lift motor, or a motor and control box on a dual-motor chair, is the expensive end.

For reference, half of the paid power recliner repairs we finished between August and October 2026 came to $330–$550 with parts and labor. Lift chairs use the same remotes, cables and power supplies. Their lift motors are heavier and cost more, so a lift chair that needs a new motor usually lands near the top of that range or above it.

Repair or replace?

A new lift chair from Pride, Golden or La-Z-Boy usually costs somewhere between $1,000 and $2,500. If the frame is solid and the problem is a motor, a remote or a power supply, repair is the cheaper road by a wide margin. Replacing the chair starts to make sense when the wooden frame is cracked, the steel lift mechanism is bent or rusted through, or the chair uses a control box that is no longer made and has no compatible substitute. We tell you which case you are in on the first visit.

If the chair is still under the maker’s warranty, call the store that sold it first. Warranty repairs go through them. Once the warranty is over, we can take it from there.

Hurricane season and power outages

Without power a lift chair stays where it stopped, and the battery backup is the only way to lower it. That only works with fresh batteries. Before June, replace them and test the backup once with the chair unplugged. Chairs that came without a backup can often take an add-on battery kit; ask the technician during the visit.

Where we repair lift chairs

We come to houses, condos and 55+ communities in four areas. On the Gulf Coast: Tampa, St. Petersburg, Clearwater and Wesley Chapel in Tampa Bay; Sarasota, Bradenton, Lakewood Ranch and Venice further south; Naples, Fort Myers, Cape Coral and Bonita Springs in Southwest Florida.

In South Florida: Palm Beach County (Boca Raton, Delray Beach, Boynton Beach, West Palm Beach, Palm Beach Gardens, Jupiter), Broward (Fort Lauderdale, Hollywood, Hallandale Beach, Pembroke Pines, Coral Springs) and Miami-Dade (Miami, Aventura, Coral Gables, Kendall). Dispatch works from our office in Hallandale Beach.

For a regular power recliner or a reclining sofa, see power recliner repair. Same technicians, same parts. Massage chairs have their own page: massage chair repair.

Frequently asked questions

My lift chair is stuck in the up position. What should I do?
Check the outlet with a lamp, look for the light on the power supply, and check the plugs under the seat with the chair unplugged. If the chair has a battery backup, put in fresh batteries and press down. If it still will not come down, leave it unplugged where it is and call us. Forcing the seat down bends the lift frame.
How do I lower a lift chair without power?
With the battery backup, if the chair has one. Many take two 9-volt batteries. Without a backup there is no safe way to bring the seat down by hand, so wait for power or for a technician.
Why does my lift chair move by itself?
Usually a stuck button or a short inside the hand control, less often the control box. Unplug the chair and do not use it until it is checked, because it can move while someone is getting in or out.
How much does it cost to fix a lift chair?
The service call is $59 and is credited to the repair. A remote, cable or power supply is at the low end; a new lift motor or a control box on a dual-motor chair costs more. Half of our paid power recliner repairs from August to October 2026 came to $330–$550. You get a written price before any part is ordered.
Can you replace the lift motor?
Yes. We read the label on the actuator (maker, part number, stroke length) and order the matching motor. On a dual-motor chair we test both motors first, so you replace only the one that failed.
Should I buy the part myself?
You can, but send us a photo of the label first. A motor or remote with the wrong plug or stroke will not fit, and the return policy on an opened part is worth checking before you buy.
Do you repair lift chairs bought from a medical supply or mobility store?
Yes. Pride, Golden Technologies and the other mobility-store brands use the same kinds of motors, remotes and power supplies as furniture-store lift recliners. If the chair is still under the maker’s warranty, contact the seller first.
Do you come to condos and senior communities?
Yes. The repair is done where the chair stands, in a house, a condo or a 55+ community, so nobody has to move it.
Which areas do you cover for lift chair repair?
Tampa Bay, Sarasota and Manatee, Naples and Fort Myers, and South Florida from Jupiter down to Homestead. Call (754) 345-4515 with your ZIP code if you are not sure.

Book a lift chair repair

Call (754) 345-4515 or use the form below. Tell us the brand, how many buttons the remote has and what happens when you press them. A photo of the label on the motor helps us bring the right part.

Request service

By submitting you agree to be contacted by phone or SMS about your service request. No marketing messages.

Recent work from our technicians

Finished, paid jobs from our records. Photos are from the visit; client details are left out.

See all recent jobs →

Call (754) 345-4515