Coffee Machine Repair
Same-day slots most days, 7 AM–9 PM. 19 factory-trained technicians, 4.79★ across 1,254 customer reviews — the $59 service call is waived when you proceed with the repair.
Request service
Built-in and premium coffee machine repair across Miami-Dade, Broward and Palm Beach. Miele CVA, Gaggenau, Jura, Wolf, Thermador, prosumer espresso. $59 service call, free with the repair · 4.79★ across 1,254 reviews · same-day slots most days.
The built-in coffee machine is the appliance people write off first, and it is the one that least deserves it. A $7,000 Miele CVA stuck on a descale message usually needs a $40 valve and an hour of work. Berne services plumbed and built-in machines, super-automatics and prosumer espresso across South Florida, with the parts that actually fail on these machines riding on the truck.
Coffee machines we repair
- Miele CVA & CM
- Gaggenau 200 & 400 series
- Jura Giga, Z and S
- Thermador & Wolf coffee systems
- Breville Dual Boiler & Oracle
- La Marzocco Linea Mini
Also Rocket, ECM, Lelit and Profitec prosumer espresso, De’Longhi La Specialista and Maestosa, and Bunn commercial brewers in offices and cafes.
What we do not take: Keurig, Nespresso, Ninja, Mr. Coffee, Hamilton Beach and countertop drip makers. A pod machine costs less than the service call, so replacing it is the honest answer, and we say that on the phone rather than after the visit. The line sits around $1,500. Above it, repair beats replacement almost every time.
Coffee machine descaling in Miami: why scale runs this town
Tap water across Broward and Miami-Dade runs 200 to 350 ppm hardness. That calcium goes straight into the boiler, narrows the flow path, and eventually blinds the flow meter. Once the meter cannot read flow, the machine loses the ability to measure its own cycle: descaling aborts halfway, or the prompt returns the moment it finishes. Most owners run the cycle three more times and buy a second bottle of descaler before calling anyone. By then the job needs tools rather than a button.
Descaling a coffee machine at that stage is not the same job as pressing the button. We take the panels off, circulate professional solution through the boiler and brew circuit, clean the flow meter and the 3-way solenoid by hand, and verify flow against spec before closing up. On a household pulling four to six drinks a day, plan a professional descaling every 12 to 18 months on top of what the machine does itself. A filter sized to your actual water pushes that interval out a long way.
Repair by brand
Miele coffee machine repair
CVA built-ins and the CM6 and CM7 countertop line. The three calls we get: a descale message that will not clear, a brew unit seized on hardened coffee oils, and water under the cabinet from the 3-way valve. Brew seals, O-rings and valves for the common models are truck stock. On plumbed CVA installs we check the cabinet base before we check the machine, because a slow leak warps the floor panel months before anyone notices it.
Jura coffee machine repair
Giga, Z and S super-automatics. Brew units jam mid-cycle, vibration pumps drop below 9 bar, grinders drift coarse until the cup goes thin. We rebuild the brew group, replace the seals, reset the gear timing and recalibrate the grind. A Z10 costs $3,000 to replace. The rebuild is a fraction of that.
Breville espresso machine repair
Dual Boiler, Oracle, Oracle Touch and the Barista line. Pale, fast shots with no crema are lost pressure, not bad beans: a tired vibration pump or an over-pressure valve bleeding off. We gauge real pressure at the group, rebuild or replace the pump, descale the path and reset grind and dose. These machines are worth the visit. The $200 countertop models are not.
Gaggenau, Thermador and Wolf coffee systems
Built-in 200 and 400 series, plumbed CMP 250, and the Thermador and Wolf systems that share the BSH platform underneath. Seized brew pistons, heater and NTC sensor faults, and supply leaks behind the surround. We pull the machine out of the column and set it back without marking the millwork.
DeLonghi espresso machine repair
De’Longhi La Specialista, Maestosa, Eletta and the Dinamica line. Thermoblock scale, brew unit wear and milk carafe faults are the usual finds. On the entry models we will tell you honestly when the repair does not pay against a replacement.
Bunn coffee machine repair
Commercial Axiom, ICB and Dual SH brewers in offices, cafes and condo amenity rooms. Tank elements plated with scale, plugged sprayheads, fill solenoids stuck open. Home Bunn brewers we leave alone.
Common problems, cause and fix
Typical repair pricing
| Repair | Typical range* |
|---|---|
| Service call (applied to the repair) | $59 |
| Coffee machine descaling, panels off | $220 to $450 |
| Brew unit service: strip, reseal, re-time | $280 to $550 |
| Brew unit assembly (OEM) | $550 to $950 |
| 3-way solenoid or plumbed leak | $220 to $480 |
| Pump or over-pressure valve | $220 to $520 |
| Thermoblock or NTC sensor | $300 to $650 |
| Grinder burrs and dose calibration | $220 to $400 |
*Parts and labor, residential. Written quote after the $59 service call, which is free with any repair you approve. 90-day labor warranty.
Repair or replace
A built-in CVA runs $4,000 to $8,000 to replace, and the cabinet cutout limits what can go back in its place, so changing brands often means changing millwork. The two repairs that cover most calls, a brew unit service and a proper descaling, land between $220 and $550. We say replace when the brew unit housing, the boiler and the electronics have gone together, or after a water event. On this class of machine that is rare.
Frequently asked questions
Related: warming drawer repair, wine cellar cooling repair, repair vs replace cost guide.