Skip to main content
Service areas Contact
(754) 345-4515 Call dispatch · 7 AM–9 PM daily

GE Dishwasher Repair

4.79★ · $59 service call · same day

Call (754) 345-4515Request service

Same-day slots most days, 7 AM–9 PM. 19 factory-trained technicians, 4.79★ across 1,217 customer reviews — the $59 service call is waived when you proceed with the repair.

Request service
Berne technicians

Rather not call? Leave your number

Name, phone and what broke. Dispatch calls you back, usually within 10 minutes between 7 AM and 9 PM.

Text us a photoSend a photo of the problem and the model tag to (786) 435-0511, or call (754) 345-4515.

By submitting you agree to be contacted by phone or SMS about your service request. No marketing messages.

GE dishwasher repair across Miami-Dade, Broward and Palm Beach. GE, Profile, Café and Monogram: GDT, GDF, PDT, CDT and the older GSD series. Not draining, not starting, lights blinking, no water, leaking door, dead control, Dry Boost not drying. $59 service call, free with the repair · 4.79★ · same-day slots most days.

(754) 345-4515 — Dispatch
Request service

GE dishwashers do not talk much. Where a Bosch shows E15 and a KitchenAid blinks a code, a GE GDT or PDT usually just stops, or blinks its start light, and leaves you guessing. That is why a GE call starts with the sump and the door instead of a code table. The list is short: a drain pump that clogs or fails, an inlet valve that quits, a door latch on the top-control models, a control board that dies quietly, and on the older GSD units a wash motor that seizes. Since Haier took over GE Appliances the parts have stayed available and cheap, and a GE dishwasher is one of the more sensible machines to keep repairing. Here is what each one costs.

GE dishwasher models we repair

  • GDT535, GDT550, GDT605, GDT630, GDT645, GDT650, GDT665, GDT670 top-control
  • GDF450, GDF510, GDF535, GDF550, GDF645 front-control and the ADT dishwashers
  • GE Profile PDT715, PDT775, PDT785, PDT795, PDP715, PDP755 with UltraFresh and Dry Boost
  • Café CDT805, CDT845, CDT875, CDP888 and the Monogram ZDT panel-ready line
  • Older GSD2100 to GSD6900, GLD and the Nautilus series
  • Compact 18-inch GDT225 and portable GPT models

GE dishwasher problems and what we do about them

Water in the bottom, will not drain
The drain pump is clogged with glass or food debris under the filter, its check valve is stuck, or the pump motor has failed. On the GDT platform the pump is reached from below with the toe kick off and is a same-visit part. A drain hose pushed too far into the disposal also siphons, and we check that before anything else because it costs nothing.
Start light blinking, will not run
On most GE models a blinking start light is a door that the control reads as open, a stuck key on the panel, or a control board that has lost its program. We check the latch and the panel first, because the board is the expensive answer and rarely the right one on a machine under eight years.
Runs but no water, dishes dry and dirty
The inlet valve, its screen clogged with mineral grit from South Florida water, or a float switch stuck up by debris. Screens are cleaned free with the visit; a valve is a same-day part.
Hums but does not wash, or grinds
The wash motor. On the older GSD units the motor seizes after years of hard water; on GDT units the circulation pump wears its bearing. A grinding wash motor is worth replacing before it takes the pump housing with it.
Leaking from the front corners or under the door
The door gasket, the lower door seal, or a cracked spray arm throwing water at the door. On top-control GDT models a warped control panel lets the door sit slightly open and leak at one corner.
Dead panel, no lights at all
A tripped thermal fuse on the control on older models, a failed door switch, or the control board. We check the power at the junction box and the fuse before condemning the board.
Dishes wet at the end, Dry Boost not helping
Rinse aid empty or the dispenser stuck, or on Profile and Café units the drying fan or its vent. The dispenser is a same-visit part; the fan assembly comes through distribution.
White film on glasses, cloudy plastics
Hard-water scale. We descale the sump and the heater and set the rinse-aid dose for Miami water. A GE with the Piranha hard food disposer also collects scale on the disposer blade, and we clear it.

GE dishwasher repair pricing

Job Typical range*
Service call (applied to the repair) $59
Filter, sump and check valve clearing $130 to $210
Drain pump $170 to $310
Door latch or door switch $150 to $280
Inlet valve or float switch $150 to $280
Door gasket or lower seal $140 to $270
Rinse-aid dispenser $150 to $280
Heating element $180 to $330
Drying fan (Profile, Café) $200 to $360
Wash motor and pump assembly $280 to $500
Control panel or user interface $240 to $440
Main control board $260 to $480

*Parts and labor, residential. Written quote after the diagnosis; the $59 service call is free with any repair you approve. 90-day labor warranty. Monogram panel-ready units add door alignment work.

Repair or replace

Pumps, latches, valves, seals, elements and dispensers are worth doing on any GE dishwasher under twelve years, and the older GSD machines are simple enough to keep going past that. The line is a wash motor and a control board failing together on a unit past nine years, where the pair reaches half the price of a new GDT630. Profile, Café and Monogram tip toward repair, since replacement means matching the rest of the kitchen or fitting a new panel.

Frequently asked questions

Do you repair GE dishwashers in Miami and Broward?
Yes, across Miami-Dade, Broward and Palm Beach, seven days a week: GE, Profile, Café and Monogram, top-control, front-control and the older GSD series. Same-day slots most days when you call before noon at (754) 345-4515.
Why does my GE dishwasher have water in the bottom?
It is not draining: debris in the pump, a stuck check valve or a siphoning drain hose most often, $130 to $210 to clear. A failed drain pump runs $170 to $310.
My GE dishwasher start light blinks and it will not run. What is it?
Usually a door latch the control reads as open, or a stuck key, $150 to $280. A control board is only quoted after the latch and the panel test good.
My GE dishwasher runs but there is no water. Why?
The inlet valve or its clogged screen, or a float switch stuck by debris. Screens are cleaned free with the visit; a valve runs $150 to $280.
How much does GE dishwasher repair cost?
Clearing and small parts run $130 to $330. A wash motor $280 to $500, a control panel $240 to $440, a main board $260 to $480. The $59 service call is free when you approve the repair.
Is a 12-year-old GE dishwasher worth repairing?
For a pump, latch, valve, element or seal, yes. If the wash motor and the board fail together past nine years, we quote a new unit alongside the repair and let you decide with both numbers.

Related: dishwasher repair, GE appliance repair, GE refrigerator repair, GE range and oven repair, Whirlpool dishwasher repair.

Request service

By submitting you agree to be contacted by phone or SMS about your service request. No marketing messages.

Call (754) 345-4515