Ice maker repair in Palm Beach Gardens
No ice in a Miami summer gets noticed fast. We repair in-refrigerator ice makers, undercounter cube machines and built-in clear-ice units — Sub-Zero to Samsung — with complete assemblies and inlet valves on the truck. $59 service call — free with repair, same-day across South Florida.
Palm Beach Gardens, Palm Beach County • Local ice maker service
What ice maker repair looks like in Palm Beach Gardens
Palm Beach Gardens is dominated by golf-community estates, so a large share of our work here is premium built-in refrigeration, double ovens and Wolf or Sub-Zero equipment where factory-correct parts are essential.
As an inland Palm Beach community, Palm Beach Gardens sees more heat-and-dust load on condensers and vents than salt corrosion, which shapes how we approach ice maker repair here.
Common ice maker problems we see in Palm Beach Gardens — symptom, cause & typical cost
| Symptom | Most likely cause | Typical repair cost* |
|---|---|---|
| Not cooling, freezer fine | Failed evaporator fan motor or defrost control | $180–$340 |
| Whole unit warm, lights on | Bad start relay, compressor, or sealed-system leak | $250–$650 |
| Leaking water on the floor | Clogged or frozen defrost drain line | $140–$260 |
| Frost build-up in freezer | Defrost heater, thermostat, or door-seal leak | $170–$330 |
| Ice maker not making ice | Water inlet valve, ice-maker module, or frozen fill tube | $160–$340 |
| Loud or constant running | Dirty condenser coils or failing condenser fan | $130–$280 |
*Typical parts-and-labor ranges for Palm Beach Gardens-area homes; exact pricing is confirmed on site. The $59 diagnostic fee is waived when you approve the repair. Built-in and luxury brands (Sub-Zero, Viking, Thermador, GE Monogram) can run higher due to sealed-system and factory-part requirements.
Do you offer same-day ice maker repair in Palm Beach Gardens?
Yes. Berne Appliance Repair runs same-day ice maker service across Palm Beach Gardens, including PGA Boulevard, the Gardens Mall, Mirasol, BallenIsles, Frenchman Creek. Book before midday and we can usually have a technician at your door the same afternoon. The $59 diagnostic fee is waived when you proceed with the repair.
Which ZIP codes around Palm Beach Gardens do you cover?
We routinely handle ice maker repair in ZIP codes 33403, 33408, 33410, 33418, plus the surrounding Palm Beach area. If your ZIP is not listed, call us — our coverage is wider than the codes shown here.
ice maker repair near Palm Beach Gardens
We also serve West Palm Beach and the rest of Palm Beach County.
Ice maker problems we fix every week
No Ice At All
A closed or failed water-inlet valve, a frozen fill tube, a clogged filter, or a dead ice-maker module. All four show up on one $59 diagnostic, and complete assemblies for Samsung, LG, Whirlpool, GE and KitchenAid are stock items on the truck — most no-ice calls finish the first visit.
Small, Cloudy or Hollow Cubes
A water-supply symptom, not a dead machine: a tired filter, a half-failed inlet valve, or South Florida mineral scale on the evaporator plate restricting flow. A descale plus a filter change usually brings back full, clear cubes the same visit.
Ice Tastes or Smells Off
An aged inline filter, a slimed supply line, or stale ice absorbing freezer odors. We replace the filter, sanitize the fill path and bin, and tell you the honest filter-change interval for Hialeah-to-Boca water — usually twice the bag-label schedule.
Leaking Water
A cracked or misaligned fill tube, an inlet valve that no longer shuts fully, or a kinked drain line on undercounter machines. Leak calls get same-day priority for floor-damage risk — shut the supply valve behind the unit if you can reach it and call.
Clear-Ice Machine Stopped Harvesting
On Sub-Zero, KitchenAid, GE Monogram and U-Line clear-ice machines a stuck harvest is usually scale on the evaporator plate or a failed water pump — the unit reads as dead when it needs a descale. Senior refrigeration technicians handle these units.
Ice systems behind the gates of Palm Beach Gardens
The Gardens’ golf communities were built for entertaining, and the ice infrastructure shows it: Sub-Zero integrated ice systems in the kitchens, KitchenAid and U-Line undercounter machines in club-style bars, and the occasional residential Scotsman for the household that takes its drinks seriously. Built-in machines fail the built-in way — condensers starved inside millwork, drain pumps scaled, cutting grids worn — and they reward factory-correct parts fitted carefully around expensive cabinetry.
Gardens water is hard even by South Florida standards, and it writes the maintenance schedule. Scale coats molds and thermostats so harvest timing drifts and cubes shrink and cloud; on undercounter machines it clogs pumps and water paths. A thorough descale is the single highest-value service we perform in these communities, and we’ll show you the parts before and after so you can see why. Gate codes and guest-list details are collected at booking so the visit doesn’t stall at the guardhouse, and seasonal residents get the same advice we give all of Palm Beach: empty, dry, and switch the ice system off before a long absence.
How an ice maker repair visit works
1. Tell Us the Machine
In-fridge ice maker, undercounter cube machine, or built-in clear-ice unit — plus the brand and what stopped. That determines which assemblies and valves ride out on the truck.
2. Same-Day Window
Call (754) 345-4515 before noon and dispatch usually books a same-day slot across Miami-Dade, Broward and Palm Beach. Restaurant or bar machine? Say so — commercial routes through Berne Commercial the same day.
3. $59 Diagnostic, In Writing
We test the inlet valve, fill path, filter and module, check for scale on the plate, and hand you a written quote. The $59 service call is free with any repair you approve.
4. Repair From Truck Stock
Complete ice-maker assemblies, inlet valves and filters for the volume brands are on the truck; Sub-Zero and Scotsman residential parts typically arrive in 1–3 business days.
5. First Bucket Verified, Tiered Warranty
We run the unit through a full harvest cycle before closeout and back the repair with a tiered parts warranty — up to 10 years on sealed-system welds — plus a 90-day labor warranty.
Need appointment?
Comments from our customers
