Ice maker repair in North Lauderdale
No ice in a Miami summer gets noticed fast. We repair in-refrigerator ice makers, undercounter cube machines and built-in clear-ice units — Sub-Zero to Samsung — with complete assemblies and inlet valves on the truck. $59 service call — free with repair, same-day across South Florida.
North Lauderdale, Broward County • Local ice maker service
What ice maker repair looks like in North Lauderdale
North Lauderdale is inland north-central Broward, so the typical service is heat-load condenser cleaning and laundry repair on the area townhome and single-family stock.
As an inland Broward community, North Lauderdale sees more heat-and-dust load on condensers and vents than salt corrosion, which shapes how we approach ice maker repair here.
Common ice maker problems we see in North Lauderdale — symptom, cause & typical cost
| Symptom | Most likely cause | Typical repair cost* |
|---|---|---|
| Not cooling, freezer fine | Failed evaporator fan motor or defrost control | $180–$340 |
| Whole unit warm, lights on | Bad start relay, compressor, or sealed-system leak | $250–$650 |
| Leaking water on the floor | Clogged or frozen defrost drain line | $140–$260 |
| Frost build-up in freezer | Defrost heater, thermostat, or door-seal leak | $170–$330 |
| Ice maker not making ice | Water inlet valve, ice-maker module, or frozen fill tube | $160–$340 |
| Loud or constant running | Dirty condenser coils or failing condenser fan | $130–$280 |
*Typical parts-and-labor ranges for North Lauderdale-area homes; exact pricing is confirmed on site. The $59 diagnostic fee is waived when you approve the repair. Built-in and luxury brands (Sub-Zero, Viking, Thermador, GE Monogram) can run higher due to sealed-system and factory-part requirements.
Do you offer same-day ice maker repair in North Lauderdale?
Yes. Berne Appliance Repair runs same-day ice maker service across North Lauderdale, including Kimberly Boulevard, Rock Island Road, State Road 7. Book before midday and we can usually have a technician at your door the same afternoon. The $59 diagnostic fee is waived when you proceed with the repair.
Which ZIP codes around North Lauderdale do you cover?
We routinely handle ice maker repair in ZIP codes 33068, plus the surrounding Broward area. If your ZIP is not listed, call us — our coverage is wider than the codes shown here.
Ice maker problems we fix every week
No Ice At All
A closed or failed water-inlet valve, a frozen fill tube, a clogged filter, or a dead ice-maker module. All four show up on one $59 diagnostic, and complete assemblies for Samsung, LG, Whirlpool, GE and KitchenAid are stock items on the truck — most no-ice calls finish the first visit.
Small, Cloudy or Hollow Cubes
A water-supply symptom, not a dead machine: a tired filter, a half-failed inlet valve, or South Florida mineral scale on the evaporator plate restricting flow. A descale plus a filter change usually brings back full, clear cubes the same visit.
Ice Tastes or Smells Off
An aged inline filter, a slimed supply line, or stale ice absorbing freezer odors. We replace the filter, sanitize the fill path and bin, and tell you the honest filter-change interval for Hialeah-to-Boca water — usually twice the bag-label schedule.
Leaking Water
A cracked or misaligned fill tube, an inlet valve that no longer shuts fully, or a kinked drain line on undercounter machines. Leak calls get same-day priority for floor-damage risk — shut the supply valve behind the unit if you can reach it and call.
Clear-Ice Machine Stopped Harvesting
On Sub-Zero, KitchenAid, GE Monogram and U-Line clear-ice machines a stuck harvest is usually scale on the evaporator plate or a failed water pump — the unit reads as dead when it needs a descale. Senior refrigeration technicians handle these units.
Slow ice in North Lauderdale usually means a hot condenser
When a North Lauderdale ice maker slows from full bins to a tray a day, our first look is underneath the refrigerator, not inside the freezer. Inland Broward heat plus household dust mats the condenser, the sealed system runs warm, and ice production — the most demanding thing the fridge does — sags first while everything else still reads normal. A deep condenser cleaning restores a large share of these machines without a single part, which is exactly the kind of fix we like to deliver.
The rest of the docket is straightforward: hard-water scale on molds and thermostats making cubes small and cloudy, filters far past due choking fill valves, worn motor modules on refrigerators deep into their second decade. The townhome and single-family stock here runs Whirlpool, GE, and Frigidaire, whose icemaker parts live on the truck, so most visits close same-day. And we’ll always tell you when a repair doesn’t make sense on an aging machine — the diagnosis is the product; the honesty comes free.
How an ice maker repair visit works
1. Tell Us the Machine
In-fridge ice maker, undercounter cube machine, or built-in clear-ice unit — plus the brand and what stopped. That determines which assemblies and valves ride out on the truck.
2. Same-Day Window
Call (754) 345-4515 before noon and dispatch usually books a same-day slot across Miami-Dade, Broward and Palm Beach. Restaurant or bar machine? Say so — commercial routes through Berne Commercial the same day.
3. $59 Diagnostic, In Writing
We test the inlet valve, fill path, filter and module, check for scale on the plate, and hand you a written quote. The $59 service call is free with any repair you approve.
4. Repair From Truck Stock
Complete ice-maker assemblies, inlet valves and filters for the volume brands are on the truck; Sub-Zero and Scotsman residential parts typically arrive in 1–3 business days.
5. First Bucket Verified, Tiered Warranty
We run the unit through a full harvest cycle before closeout and back the repair with a tiered parts warranty — up to 10 years on sealed-system welds — plus a 90-day labor warranty.
Need appointment?
Comments from our customers
