Ice maker repair in Miramar
No ice in a Miami summer gets noticed fast. We repair in-refrigerator ice makers, undercounter cube machines and built-in clear-ice units — Sub-Zero to Samsung — with complete assemblies and inlet valves on the truck. $59 service call — free with repair, same-day across South Florida.
$59 covers the visit and diagnosis and is credited to the repair if you go ahead. If you don't, it's the only charge.
Miramar, Broward County • Local ice maker service
What ice maker repair looks like in Miramar
Miramar is inland south Broward with newer master-planned communities, so we see a lot of builder-grade refrigerators, dishwashers and laundry pairs hitting their first major failures around the 5 to 8 year mark.
As an inland Broward community, Miramar sees more heat-and-dust load on condensers and vents than salt corrosion, which shapes how we approach ice maker repair here.
Common ice maker problems we see in Miramar — symptom, cause & typical cost
| Symptom | Most likely cause | Typical repair cost* |
|---|---|---|
| Not cooling, freezer fine | Failed evaporator fan motor or defrost control | $180–$340 |
| Whole unit warm, lights on | Bad start relay, compressor, or sealed-system leak | $250–$650 |
| Leaking water on the floor | Clogged or frozen defrost drain line | $140–$260 |
| Frost build-up in freezer | Defrost heater, thermostat, or door-seal leak | $170–$330 |
| Ice maker not making ice | Water inlet valve, ice-maker module, or frozen fill tube | $160–$340 |
| Loud or constant running | Dirty condenser coils or failing condenser fan | $130–$280 |
*Typical parts-and-labor ranges for Miramar-area homes; exact pricing is confirmed on site. The $59 diagnostic fee is waived when you approve the repair. Built-in and luxury brands (Sub-Zero, Viking, Thermador, GE Monogram) can run higher due to sealed-system and factory-part requirements.
Do you offer same-day ice maker repair in Miramar?
Yes. Berne Appliance Repair runs same-day ice maker service across Miramar, including Miramar Parkway, Monarch Lakes, Silver Lakes, Sunset Lakes. Book before midday and we can usually have a technician at your door the same afternoon. The $59 diagnostic fee is waived when you proceed with the repair.
Which ZIP codes around Miramar do you cover?
We routinely handle ice maker repair in ZIP codes 33023, 33025, 33027, 33029, plus the surrounding Broward area. If your ZIP is not listed, call us — our coverage is wider than the codes shown here.
ice maker repair near Miramar
We also serve Pembroke Pines, Davie, Hollywood and the rest of Broward County.
Ice maker problems we fix every week
No Ice At All
A closed or failed water-inlet valve, a frozen fill tube, a clogged filter, or a dead ice-maker module. All four show up on one $59 diagnostic, and complete assemblies for Samsung, LG, Whirlpool, GE and KitchenAid are stock items on the truck — most no-ice calls finish the first visit.
Small, Cloudy or Hollow Cubes
A water-supply symptom, not a dead machine: a tired filter, a half-failed inlet valve, or South Florida mineral scale on the evaporator plate restricting flow. A descale plus a filter change usually brings back full, clear cubes the same visit.
Ice Tastes or Smells Off
An aged inline filter, a slimed supply line, or stale ice absorbing freezer odors. We replace the filter, sanitize the fill path and bin, and tell you the honest filter-change interval for Hialeah-to-Boca water — usually twice the bag-label schedule.
Leaking Water
A cracked or misaligned fill tube, an inlet valve that no longer shuts fully, or a kinked drain line on undercounter machines. Leak calls get same-day priority for floor-damage risk — shut the supply valve behind the unit if you can reach it and call.
Clear-Ice Machine Stopped Harvesting
On Sub-Zero, KitchenAid, GE Monogram and U-Line clear-ice machines a stuck harvest is usually scale on the evaporator plate or a failed water pump — the unit reads as dead when it needs a descale. Senior refrigeration technicians handle these units.
The first failure: ice makers in Miramar’s newer homes
In Miramar’s master-planned communities we can almost date a house by its ice call. The builder-grade refrigerators installed in Monarch Lakes, Silver Lakes, and Sunset Lakes tend to hit their first real failure between years five and eight — and that first failure is very often the ice maker, the hardest-worked mechanism in the box. Motor modules wear, fill valves scale up on hard water, and fill tubes freeze behind slowing fills. All of it is routine, and the common Whirlpool, GE, and Samsung assemblies ride on our truck.
Because the neighborhoods went up in waves, the failures arrive in waves too, and we’ve learned the pattern well enough to bring the right parts the first time. The honest version of the story: an ice maker failure at year six is not a verdict on the refrigerator, which usually has a decade left. Fix the module, change the filter that’s quietly two years past due, descale the mold, and the machine goes back to full bins. Same-day windows in Miramar are usually realistic.
How an ice maker repair visit works
1. Tell Us the Machine
In-fridge ice maker, undercounter cube machine, or built-in clear-ice unit — plus the brand and what stopped. That determines which assemblies and valves ride out on the truck.
2. Same-Day Window
Call (754) 345-4515 before noon and dispatch usually books a same-day slot across Miami-Dade, Broward and Palm Beach. Restaurant or bar machine? Say so — commercial routes through Berne Commercial the same day.
3. $59 Diagnostic, In Writing
We test the inlet valve, fill path, filter and module, check for scale on the plate, and hand you a written quote. The $59 service call is free with any repair you approve.
4. Repair From Truck Stock
Complete ice-maker assemblies, inlet valves and filters for the volume brands are on the truck; Sub-Zero and Scotsman residential parts typically arrive in 1–3 business days.
5. First Bucket Verified, Tiered Warranty
We run the unit through a full harvest cycle before closeout and back the repair with a tiered parts warranty — up to 10 years on sealed-system welds — plus a 90-day labor warranty.
Need appointment?
Comments from our customers
